Saturday, November 5, 2011

Clean Machine Car

When I open the hood and see a dirty car engine is often a desire to clean it, but the thing that often hinder to wash the car because they do not know how to clean a car engine. It also arises concerns the engine will be damaged when washed.


It should be careful - careful when washing your car engine, the most important thing to note: do not ever use a high pressure water. I could have the car does not start up again because water gets into the spark plug or entered into an electronic device.


The engine will be warm so that dirt and grease which attaches to the machine easier to clean. When the engine is cold, start the engine a while until the engine gets warm, then turn off the engine. After that cover the sensitive parts such as air filter hole, where the spark plugs and electrical components using plastic bags held together with insulation.


Now the engine has been warm and the parts that should not be subject to water has been well protected, spray the entire engine and the engine by using a cleaning machine (degreaser) good quality. Starting from the bottom up to the top. Let stand for 5 minutes for cleaning the machine works. Then use a cloth made ​​from 100% cotton or a soft brush to clean the dirt tightly. Spray and clean the parts are hard to clean up dirt disappear.

After all parts of the machine and place the machine is clean, spray with water to remove the cleaning machine. If still there is also a part of the dirty, spray again with the degreaser and try to remove the dirt with the help of 100% cotton cloth or soft brush. The next step is to dry the wet part of using cloth.

No comments:

Post a Comment